Summary of Contents for DOM FAMILY Cape Town 5-in-1 Convertible Crib 729
Page 1
Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly,keep out of reach of children until assembly is complete. Cape Town 5-in-1 Convertible Crib THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Consumer Care: style # : 729 www.dreamonme.com...
Page 2
CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING 6 IN. WARNING: . Infants can suffocate on soft bedding.Never add a pillow or comforter.Never place additional padding under an infant.
Page 3
TODDLER BED WARNING: INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. The maximum user weight is 50Ibs(22.7kg) WARNING STRANGULATION HAZARD NEVER place bed near windows where cords from blinds or drapes may strangle a...
Page 4
ATTENTION! Respecter les avertissements sur tous les produits du berceau. L'assemblage par un adulte est nécessaire. Les petites pièces peuvent présenter un danger d'étranglement avant l'assemblage. Ci-joint s'il vous plaît trouver les instructions simples, étape par étape pour vous aider à assembler rapidement vos produits.
Page 5
de transport ou tout autre film plastique pour recouvrir le matelas non vendu et conçus à cette fin, ils peuvent provoquer la suffocation. ATTENTION: Tout matelas utilisé dans ce lit doit être au moins 27-1/4 pouces (690mm) par 51-5/8 pouces (1310mm), avec une épaisseur n'excédant pas 6 pouces (150 mm), les dimensions du matelas doivent être prises de la couture à...
Page 6
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. A: LEFT CRIB END (1 pc) B: RIGHT CRIB END (1 pc) C: Back rail (1 pc) D:The bottom bar (1pc) E: Front rail (1 pc) POUCH ATTACHED TO MATTRESS SUPPORT -KEEP INSTRUCTIONS IN THIS POUCH AFTER ASSEMBLY.
Page 7
PARTS: HARDWARE KIT IS PART #21598 FOR COLOR 209 OR #23486 FOR COLOR 607. SEE FRONT COVER. No drills necessary. a. M6 x 45 mm BOLT x 8 Do not use power screwdriver Phillips Screwdriver (not supplied) b. M6 x 40 mm BOLT x 2 c.
SECTION 1: Crib Assembly STEP 1 Parts and tools required to complete step. Left Crib End Right Crib End Back rail a. M6 x 45 mm BOLT x 4 M4 ALLEN WRENCH SUPPLIED Attach The Back Rail (C) to the Left Crib End (A) and Right Crib End (B), using Bolts (a) Tighten with the Allen Wrench (f ) .
Page 9
SECTION 1: Crib Assembly STEP 2 Parts and tools required to complete step. D:The bottom bar (1pc) M4 ALLEN WRENCH SUPPLIED From Step 1 d. Wood dowels (2pcs) e. Crescent Washer x 2 b. M6 x 40 mm BOLT x 2 Attach The bottom bar (D) to the assemblies from step 1, using (d) Φ8x30 mm wood dowels, (e) Half Moon Washer and (a) M6x40 mm Bolts .
Page 10
SECTION 1: Crib Assembly STEP 3 Parts and tools required to complete step. M4 ALLEN WRENCH SUPPLIED From Step 2 F. Mattress support (1 pc) c. M6 x15 mm BOLTx4 Attach the Mattress Support (F) in all corners using Bolt (c) in each corner. Tighten with the Allen Wrench.
Page 11
SECTION 1: Crib Assembly STEP 4 Parts and tools required to complete step. From Step 3 E: Front rail X1 M4 ALLEN WRENCH a. M6 x 45 mm BOLT x 4 SUPPLIED AttachThe front rail (E) to The assembly from step 3 using bolts (a).Tighten All Bolts with the allen wrench (f) .
Page 12
SECTION 1: Crib Assembly STEP 5 Parts and tools required to complete step. Assenmbly Instruction Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly,keep out of reach of children until assembly is complete. Booklet 5 IN 1 CRIB THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
Page 13
SECTION 2: Toddler Bed Conversion STEP 1 Parts and tools required to complete step. Finished Crib f. M4 ALLEN WRENCH SUPPLIED Remove the Front Rail installed in step 5 of section 1 Crib Assembly.
SECTION 2: Toddler Bed Conversion STEP 2 ! WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS The mattress support must be in the lowest positions. Store all hardware safely. Read all warnings on page 3. As shown, use as a day bed or love seat sofa. No Not use without stabilizer bar installed.
Page 15
Converting crib to a Youth bed I Conversion kit is sold separately You have the option to convert crib to a youth bed I 1:Use the right head board and left head board as the headboard and footboard of youth bed I; 2:Connect the right head board and the left head board to the keyslot bedframe which are not included and sold...
Page 16
To register your product for important safety alerts and updates to your product please visit www.dreamonme.com Please do not return this item to the store before contacting us about missing parts or with any questions. To report a problem, please log on to www.dreamonme.com and contact us by phone at 732-366-1788 In the event that you need to contact our customer service department please have the Style Number and MFG available.
Page 17
LIMITED WARRANTY workmanship and agrees to remedy any such defect. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. assembled, subjected to misuse or abuse or which has been altered or repaired in any way.