Reset / Hold; Dmx Mode - Ignition PAR 56 SHORT FLOOR 15X3W PWM RGB User Manual

Determines the maximum intensity of the colour green 0 % - 100%. This setting overwrites every
other setting like the max output in manual or DMX mode and the built in programs.
Determines the maximum intensity of the colour blue 0 % - 100%. This setting overwrites every
other setting like the max output in manual or DMX mode and the built in programs.

4. Reset / Hold

If you push and hold +/- for more than 3 sek., the SETUPDIM will do a reset.

5. DMX Mode

DMX Mode: (Display blink, if there is no DMX signal)
Connect the signal out of you controller with the XLR in plug on the fixture.
On the XLR out you can connect other DMX controllable fixtures.
LED PAR56L 15x3W PWM RGB
7 / 12