Table of Contents
Advertisement
"Disassemble the LCD unit" on page 78
"Remove the hinge cover" on page 78
Step 1.
Detach the two cable connectors. Remove three screws.
Figure 81. Remove three screws
Screw specifications
M2 x L3.5
Step 2.
Remove the two pieces of removable tape with tweezers and then remove the LCD panel.
Figure 82. Remove the LCD panel
Step 3.
Turn the LCD panel over. Peel off tape then disconnect the EDP cable from the LCD panel.
Number of screws
3
.
Chapter 4
Removing a FRU or CRU
79
Advertisement
Table of Contents
