"Remove the solid-state drive (SSD) module" on page 62
"Remove the Wi-Fi card" on page 63
"Remove the heat sink" on page 64
"Remove the fan" on page 65
"Remove the touchpad cable" on page 71
"Remove the system board" on page 73
Step 1.
Remove the fingerprint board cable.
Note: For details, see "Remove the fingerprint board module" on page 68.
Step 2.
Remove the two pieces of tape.
Figure 70. Remove the two pieces of tape
Step 3.
Remove two screws.
Figure 71. Remove two screws
Screw specifications
M1.2 x L1.7
Step 4.
Remove the touchpad.
72
Hardware Maintenance Manual
Number of screws
2