Removal Procedure For Ideapad Flex 5 16Iru8 And Ideapad Flex 5 16Abr8; Remove The Lower Case - Lenovo 16IRU8 Hardware Maintenance Manual

Sensor board
Removable tape
Remove the LCD cover
Make sure the following FRUs (CRUs) have been removed.
"Disassemble the LCD unit" on page 53
"Remove the hinge cover" on page 53
"Remove the LCD panel and EDP cable" on page 53
"Remove the microphone rubbers" on page 55
"Remove the camera privacy shutter" on page 56
"Remove the hinges" on page 56
"Remove the camera" on page 57
"Remove the camera cable" on page 58
"Remove the touch panel cable and sensor board" on page 58
Go to https://support.lenovo.com/partslookup
part:
LCD cover
Removal procedure for IdeaPad Flex 5 16IRU8 and IdeaPad Flex 5
16ABR8

Remove the lower case

Make sure the computer has been shut down before servicing the computer.
Step 1. Place the computer upside down on a flat surface.
Step 2. Remove nine screws.
Figure 48. Remove nine screws
60
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement