Table of Contents
Advertisement
Figure 42. Remove six screws and remove the hinges
Screw specifications
M2.5 x L3
Go to
https://support.lenovo.com/partslookup
part:
Hinges
Remove the camera
Make sure the following FRUs (CRUs) have been removed.
"Disassemble the LCD unit" on page 53
"Remove the hinge cover" on page 53
"Remove the LCD panel and EDP cable" on page 53
Step 1.
Disconnect the camera cable from the camera board and then remove the camera.
Figure 43. Disconnect the camera cable from the camera board and remove the camera
Go to
https://support.lenovo.com/partslookup
replacement parts:
Camera
Number of screws
6
to look up the Lenovo part number of the following replacement
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
57
Advertisement
Table of Contents
