Usage - Sanitas SBC 22 Instructions For Use Manual

Hour format
The hour format flashes on the display.
• Select the desired hour format using the mem-
ory button and confirm with the START/
STOP button .
Date
The year flashes on the display.
• Select the desired year using the memory
button and confirm with the START/
STOP button .
The month flashes on the display.
• Select the desired month with the memory
button and confirm with the START/STOP
button .
The day flashes on the display.
• Select the desired day using the memory button
and confirm with the START/STOP button
If the hour format is set as 12h, the day/month dis-
play sequence is reversed.
Time
The hours flash on the display.
• Select the desired hour using the memory
button
button
The minutes flash on the display.
• Select the desired minute using the memory
button
button
Once all the data has been set, the device switches off au-
tomatically.

7. USAGE

Attaching the cuff
• Fundamentally, blood pressure can be measured on
both wrists. Certain deviations between the measured
.
blood pressure on the right wrist and left wrist are due to
physiological causes and completely normal. You should
always perform the measurement on the wrist with the
highest blood pressure values. Before starting self-meas-
urement, consult your doctor in this regard. From this
point on, always take measurements on the same wrist.
29
and confirm with the START/STOP
.
and confirm with the START/STOP
.