Iii-6-2. Ipv6 - Edimax 4717964703293 User Manual

LAN IP Address
Subnet Mask
WORK MODE
DHCP Client Range
Lease Time
Static DHCP
Domain Name
802.1d Spanning Tree

III-6-2. IPv6

Go to Settings > LAN > IPv6. This page shows the information of IPv6.
Router's LAN IP. The default is 192.168.1.254. You
can change it according to your needs.
Router's LAN subnet mask
If it is selected, the router serves as the DHCP server
and automatically assigns IP addresses to all
computers in the LAN
Enter the start and end IP address of all the available
successive IPs.
Select the time for using one assigned IP from the
dropdown list. After the lease time, the AP
automatically assigns new IP addresses to all
connected computers
This page allows you reserve IP addresses, and assign
the same IP address to the network device with the
specified MAC address any time it requests an IP
address. This is almost the same as when a device
has a static IP address except that the device must
still request an IP address from the DHCP server
Set the domain name of the server
Enable or disable spanning tree function
30