Installation - LG WM3434H Series Owner's Manual

I nstallation
Install or store unit where it will not be exposed to temperatures below freezing or
exposed to outside weather conditions.
Properly ground washer to conform with all governing codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at
all times.
Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.
Shipping bolts
The appliance is fitted with shipping bolts
to prevent internal damage during
transport.
• Packing and all shipping bolts must be
removed before using the washer.
When unpacking the base, be sure to
remove the additional packing support
in the middle of the base packing.
Removing shipping bolts
1. To prevent internal damage during
transport, 4 locking bolts are
installed. Before operating the
washer, remove the bolts.
• If they are not removed, it may cause
severe vibration, noise, and
malfunction.
2. Unscrew the 4 bolts with the wrench
supplied.
Washer
Base Packing
3. Take out the 4 bolts by twisting the
braces slightly. Keep the 4 bolts and
the wrench for future use.
• Whenever the appliance is transported,
the shipping bolts must be replaced.
4. Close the holes with the caps supplied.
Packing Support
5