Subscribe to Our Youtube Channel
Related Manuals for Clarke CBAT2
Summary of Contents for Clarke CBAT2
- Page 1 12V BATTERY/ALTERNATOR TESTER MODEL NO: CBAT2 PART NO: 6260106 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS DL0323...
-
Page 2: Environmental Recycling Policy
INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Instructions
THOSE IN YOUR VEHICLE HANDBOOK VERY CAREFULLY BEFORE USING THE TESTER, KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE. Clarke International are not liable for any damages or consequences resulting from: • Connection and installation errors. • Damage to the device due to mechanical influences or voltage surges or any modification to the device. -
Page 4: Other Information
(- or black). DO NOT reverse the connections. 15. If the outer insulation of the cable is damaged, it may cause a short circuit. Stop using it immediately and contact your Clarke dealer. OTHER INFORMATION The Battery Tester is suitable for all types of 12V lead acid batteries (vehicle batteries). -
Page 5: Display Identification
DISPLAY IDENTIFICATION LCD Display Screen Alternator Test Indicator - Charge Battery Test Indicator - Low Battery Test Start Button Battery Test Indicator - Alternator Test Start Button Medium Battery Test Indicator - High 12V Cigarette Lighter Test Lead Alternator Test Indicator - Crocodile Clips Test Lead Over Alternator Test Indicator -... -
Page 6: Operation
OPERATION FUNCTION DESCRIPTION Testing of all 12V vehicle lead-acid batteries. Shows real-time voltage and battery charge with the results shown as LOW/MID/FULL. Test charging system with the results shown as LOW/OVER/ CHARGE, and displays the charging voltage in real time. Two options available for connecting: •... - Page 7 • Testing with the Cigarette Lighter Test Lead: Insert the cigarette lighter test lead into the 12V DC cigarette lighter socket of the vehicle. Turn off all electrical equipment and wait for the voltage to stabilize. Press the Battery button to enter the battery test function. This will show on the LED screen the voltage value and the test result.
-
Page 8: Maintenance
• If the OVER light is on, it means that the alternator output voltage is high. Voltage >15V • If the LOW light is on, it means that the alternator output voltage is low. Voltage: <13.5V • If the CHARGE light is on, it means the charging system is normal. -
Page 9: Specification
SPECIFICATION Product Description Alternator and Battery Tester Part number 6260106 Operating Temp. Range -20c - 70c Input Voltage 6V -25V (12V System) Measurement (H x W x D) 110 x 60 x 15 mm Product Weight 130g Compatible Battery Types 12V Lead Acid Batteries: WET (Flooded) MF (Maintenance Free) - Page 10 DECLARATION OF CONFORMITY - UKCA Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 11: Declaration Of Conformity (Ce)
DECLARATION OF CONFORMITY - CE Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CBAT2 and is the answer not in the manual?
Questions and answers