BST PRO12DSP Instruction Manual page 5

PRO12DSP / PRO15DSP • 5
For the USB socket:
USB connector for saving or loading speaker setup data, either through a USB flash drive or connected to a
computer. In the case of a USB extension cable, the cable should not exceed 1m in length.
INSTALLATION OF DSP SOFTWARE
Connect your amplifier to your computer via a cable. Switch your amplifier on. Open the software.
The connector icon CONN lights up in green on your computer screen.
Click on "File" and select "Open". Select the procedure you want to edit: D-15B.... (the name of the file)
Click on MODE 1 / MODE 2 / MODE 3 / MODE 4 / MODE 5 to debug them.
When you finished debugging, save it by clicking on "File" and choose "Save". You can either replace the
previous file or you can save and rename it as a new file.