NME1850 & FME2400
MAINTENANCE: Air Cooled
5. Clean each air cooled condenser. Use a vacuum
cleaner or coil cleaner if needed. Do NOT use a wire
brush.
A. Remove top panel.
TOP
PANEL
B. Remove two screws, and unplug the fan motors.
LOCATING
PINS
Disconnect electrical
power before beginning.
CAP SCREW
UNPLUG
LEADS
January 1994
C. Pull fan motor assembly off of locating pins and
out of the unit.
D. Clean the condenser; reassemble by placing
the fan motor assembly onto the locating pins,
replacing the mounting screws, plugging the fan
motors back in, and replacing the top panel.
Reconnect power.
Page 18
FAN MOTOR
ASSEMBLY