For The Installer - Scotsman CME650R Service Manual

Scotsman cme650r ice machine: user guide
Table of Contents

Advertisement

CME650R

FOR THE INSTALLER

The CME650R will fit the following Scotsman ice
storage bins:
*BH550
*HTB500, HTB350, HTB250
BH800 (with bin top KBT23)
BH900 (with bin top KTB22)
BH1360
It will also fit these Scotsman Dispensers:
CD200
IS150 (with adapter kit KADCM1)
RS150 (with adapter kit KADCM1)
*These smaller bins are recommended.
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.S.A.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
Model Number
Dimensions
(without bin)
W" x D" x H"
CME650RE-32A 30 X 24 X 27 208-230/60/1 16.9
CME650RE-3A 30 X 24 X 27 208-230/60/3 5.9
* Minimum Circuit Ampacity is used to determine wire size and type per the National Electric Code.
** The unit is shipped with the full charge in the receiver. For re-charging purposes, if the nameplate charge
is different than this number, go by the nameplate.
Use Scotsman remote condenser RCE651-32A, RCE652-32A or ERC201-32A or ERC402-32A. Use
precharged tubing kit RTE25 (25') or RTE40 (40"). Fan relay kit KCMR230 required when two ice machines
are powering 1 remote condenser.
This ice system (except remote condenser) is designed to be installed indoors, in a controlled environment.
Air Temperature
Water Temperature
Water Pressure
Voltage
Basic
Minimum
Electrical
Circuit
Ampacity*
MINIMUM
0
50
F.
0
40
F.
20 psi
-10%
December 1995
Page 2
A remote condenser and precharged tubing kit are
required to assemble this ice system.
The normal finish for the machine is enamel. An
optional stainless steel panel kit (SPKCMD-1) can
be field installed. It contains a stainless steel top,
side panels, service panels, and front panel.
Maximum Fuse
(or HACR Circuit
Breakers) Size
20
15
MAXIMUM
0
100
F.
0
100
F.
80 psi
+10%
Refrigerant
Condenser
Charge**
Type
HP62 (R-404a)
208 oz.
Remote Air
208 oz
Remote Air

Advertisement

Table of Contents
loading

Table of Contents