Final Check List - Scotsman CME650R Service Manual

CME650R

FINAL CHECK LIST

1. Is the cabinet in a room where ambient
temperatures are within the minimum and
maximum temperatures specified?
2. Is there clearance at the left and back sides of
the cabinet for service access?
3. Has water supply pressure been checked to
insure a minimum of 20 PSIG and a maximum of
80 PSIG operating pressure?
4. Is the cabinet level?
5. Check that any shipping material has been
removed from inside the
FINAL INSTALLATION
cabinet.
6. Check that the bin
thermostat bracket has been
LEVEL
ASSEMBLY
installed, and the bin
thermostat capillary tube has
been routed thru the bracket.
7. Have all electrical, water and
drain connections been made?
8. Is the water supply line shut
off valve installed and electrical
wiring properly connected?
PRECHARGED
9. Check all refrigerant lines
LINES
and conduit lines, to guard
CONNECTED
against vibration or rubbing and
possible failure.
10. Have the bin and cabinet
been wiped clean?
11. Has the Manufacturers
Registration form been properly
filled out? Check for correct
model and serial numbers from
Serial nameplate, then mail to
OPTIONAL
the SCOTSMAN factory.
FILTER
12. Has the owner/user been
HAND SHUT
given the Service Manual and
OFF VALVE
instructed how to operate and
maintain the icemaker?
SUMP
13. Has the owner been given
DRAIN
the name and telephone
BIN
number of the authorized
DRAIN
SCOTSMAN Service Agency
serving him?
October 1994
Page 11