Electrical - Scotsman CME256 Product Manual

CME256, 506, 656, 806: AutoIQ™ Cubers

Electrical:

All models must be installed with the correct wire
size and type per the National Electric Code.
Locate the nameplate on the back of the cabinet
and find the numbers for Voltage, Phase, Minimum
Circuit Ampacity and Maximum Fuse Size. Either
fuses or HACR type circuit breakers may be used.
Electrical connections are made in the junction box
in the back of the cabinet.
1. Remove the junction box cover.
2. Knock out 1 hole for a field supplied strain relief.
3. Install wires and strain relief per code.
4. Connect to wires and secure ground wire to
ground screw inside junction box.
Junction Box
Electrical Access
Follow all Local, State and National codes.
Electrical Connection
January 2002
Page 7