Aux In Mode - Silvercrest 313950 Quick Start Manual

AUX IN mode

CAUTION
► Use the speaker in AUX IN mode only in dry indoor
environments and with the supplied 3.5 mm jack cable
You can listen to music from a portable audio device connected via
the 3.5 mm jack cable
♦ Make sure that the speaker is switched off.
♦ Open the protective cover
♦ Use the 3.5 mm jack cable
3.5 mm jack socket
♦ Press and hold the
speaker on. You will hear a beep and the operating/charging
LED lights up blue.
♦ Start playback on the audio device and adjust the volume to a
moderate level.
♦ Then set the desired volume using the
on the speaker.
♦ If you are no longer using the speaker in AUX IN mode, remove
the 3.5 mm jack cable
cover .
SLL 10 A1
.
.
to connect the audio device to the
on the speaker.
button for about 3 seconds to turn the
from the speaker and close the protective
button or
GB │ IE
.
button
│
57 ■