Additional Maintenance - Scotsman CME1056R User Manual

CME1056R

Additional Maintenance

Additional Maintenance: Water Distributors
It may become necessary to remove the water
distributors from the top of the evaporator and
clean (de-mineralize) them outside of the ice
machine.
1. Remove front panel.
2. Push and release the OFF button.
3. Remove the evaporator cover.
4. Lift the water distributors up at the center until
they snap apart.
Water Distributor
5. Repeat for all evaporators.
6. Examine the top of the evaporators. The Water
Distribution Channels must be free from mineral
build up. If build up is evident, scrub the channels
with Scotsman Ice Machine Cleaner and a plastic
bristle brush.
7. Examine the water distributors. Although they
are made of a material that is resistant to mineral
build up, some may be present. Soak or scrub the
distributors in or with a solution of Scotsman Ice
Machine Cleaner and warm potable water.
8. Return the water distributors to their normal
installed position.
9. Push and release the clean button to flush the
water system.
10. After the machine stops, push and release the
Freeze button.
11. Replace the evaporator covers.
12. Replace the front panel.
Water Level Sensor
Clean the lenses inside the water level sensor.
1. Remove the sensor from its installed position.
2. Remove dust cover.
3. Wipe
lenses clean
with a cotton
swab.
Dust Cover
Water
Channels
4. Reverse to
reassemble.
May 2000
Page 26
Lenses