Separate Purchase - LG UF95 Series Manual

Hide thumbs Also See for UF95 Series:

Owner's manual (44 pages)

Quick manual (33 pages)

Owner's manual (32 pages)

Table Of Contents

Table of Contents

Preparing

NOTE

• If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

• Image shown may differ from your TV.

• Your TV's OSD (On Screen Display) may differ slightly from that

shown in this manual.

• The available menus and options may differ from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The TV can be placed in standby mode in order to reduce the power

consumption. And the TV should be turned off if it will not be

watched for some time, as this will reduce energy consumption.

• The energy consumed during use can be significantly reduced if the

level of brightness of the picture is reduced, and this will reduce

the overall running cost.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV's USB port.

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI®/

Cable (3 m or less)

- High-Speed HDMI®/

Cable with Ethernet (3 m or less)

CAUTION

• Do not use any unapproved items to ensure the safety and product

life span.

• Any damage or injuries caused by using unapproved items are not

covered by the warranty.

• Some models have a thin film attached on to the screen and this

must not be removed.

• Do not remove the panel with your fingers or any tools. Doing so

may damage the product. (Only UF95**)

• When attaching the stand to the TV set, place the screen facing

down on a cushioned table or flat surface to protect the screen

from scratches.

• Make sure that the screws are inserted correctly and fastened

securely. (If they are not fastened securely enough, the TV may tilt

forward after being installed.) Do not use too much force and over

tighten the screws; otherwise screw may be damaged and not

tighten correctly.