LG UF67 Series Owner's Manual
Hide thumbs
Also See for UF67 Series:
- Owner's manual (47 pages) ,
- Owner's manual (36 pages) ,
- Owner's manual (49 pages)
Related Manuals for LG UF67 Series
Summary of Contents for LG UF67 Series
- Page 1 LED TV UF67** www.lg.com (M4 X L14) P/No: MFL68761411 (1503-REV00) Printed In Korea...
- Page 2 • Read (Safety and Reference) English • For the power supply and power consumption, refer to the label attached to the product. • 閱讀（安全及參考） 粵語 • 關於電源供應及耗電量，參閱於產品上的標籤。...
- Page 4 ANTENNA / CABLE IN OPTICAL DIGITAL AUDIO OUT VIDEO AUDIO MONO AUDIO VIDEO...
- Page 6 40UF6710-CJ 含底座（毫米) 906 x 580 x 179 尺寸 (寬 x 高 x 深) With stand (mm) 不含底座（毫米) Dimensions (W x H x D) 906 x 524 x 56.7 Without stand (mm) 含底座（千克) 重量 With stand (kg) 不含底座（千克) Weight Without stand (kg) 電源要求...
-
Page 9: Safety And Reference
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com... -
Page 10: Safety Instructions
Safety Instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not Do not place the TV and/or remote control in the following secured completely into socket, fire ignition may break out. - Page 11 Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
- Page 12 Only use the attachments / accessories specified by the manufacturer. Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. When installing the antenna, consult with a qualified service technician.
- Page 13 We recommend that you maintain a distance of at least 2 to 7 times Do not turn the product On/Off by plugging-in or unplugging the power the diagonal screen size when watching TV. If you watch TV for a long plug to the wall outlet.
- Page 14 Do not press strongly upon the panel with a hand or sharp object such When moving or unpacking the product, work in pairs because the as nail, pencil or pen, or make a scratch on it, as it may cause damage product is heavy.
- Page 15 Preparing NOTE You may find different brightness and color of the panel depending on • If the TV is turned on for the first time after it was shipped from your viewing position(left/right/top/down). the factory, initialization of the TV may take a few minutes. This phenomenon occurs due to the characteristic of the panel.
-
Page 16: Maintenance
Maintenance Lifting and moving the TV Please note the following advice to prevent the TV from being scratched Cleaning your TV or damaged and for safe transportation regardless of its type and size. Clean your TV regularly to keep the best performance and to extend the • ... -
Page 17: Using The Joystick Button
Using the Joystick button NOTE • When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you (Image shown may differ from your TV.) press the joystick button first, you may not be able to adjust the volume level and saved programmes. -
Page 18: Securing The Tv To A Wall
We recommend the • Disconnect the power first, and then move or install the TV. use of LG’s wall mount bracket. When you do not use LG’s wall mount Otherwise electric shock may occur. -
Page 19: Connections (Notifications)
Connections (notifications) NOTE • Use the screws that are listed on the VESA standard screw specifications. Connect various external devices to the TV and switch input modes to • The wall mount kit includes an installation manual and necessary select an external device. For more information of external device’s parts. -
Page 20: Other Connections
RATIO AV MODE Other connections Connect your TV to external devices. For the best picture and audio Accesses your favourite programme list. quality, connect the external device and the TV with the HDMI cable. Shows programme guide. Some separate cable is not provided. Mutes all sounds. -
Page 21: Open Source Software Notice Information
Dolby and the double-D symbol are trademarks of Dolby LG Electronics will also provide open source code to you on CD-ROM Laboratories. for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. - Page 22 • Motion Eye Care / Smart Energy Saving : [Depending on • Expert mode is for picture tuning professionals to control model] Saves power consumption by adjusting the brightness and fine-tune using a specific image. For normal images, the corresponding to the movement of the image on the screen. effects may not be dramatic.
- Page 23 10 bit 12 bit Connect LG audio device with the logo to the optical digital YCbCr 4:2:0 YCbCr 4:2:0 audio output port. LG audio device allows you to enjoy rich powerful 50.00 YCbCr 4:2:2 3840 x 2160p sound easily. 59.94...
- Page 24 • [Depending on model] • Use only USB storage devices formatted with the Windows FAT32 If you select or play media from a the device with a home theatre or NTFS File System. function, the HT Speaker(Speaker) is automatically connected. • ...
-
Page 25: Supported Audio Formats
• 3gp, 3gp2 [Video] H.264/AVC, MPEG-4 Part2 [Audio] AAC, AMR(NB/WB) • *DTS / *rm / *rmvb : Depending on model To obtain detailed User Guide information, please visit www.lg.com. Supported Audio Formats • File type : mp3 External Control Device [Bit rate] 32 Kbps - 320 Kbps [Sample freq.] 16 kHz - 48 kHz... -
Page 26: Troubleshooting
Troubleshooting Cannot control the TV with the remote control. • Check the remote control sensor on the product and try again. • Check if there is any obstacle between the product and the remote control. • Check if the batteries are still working and properly installed ( to , to ). -
Page 27: Specifications
Specifications Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV Analogue TV PAL D/K, PAL-I Television system DTMB NTSC-M PAL D/K : VHF/UHF 1 to 69, Cable 1 to 47 Programme coverage DTMB : 21 to 69... - Page 28 HDMI-DTV supported mode HDMI-PC supported mode Use HDMI IN 1 for PC mode Vertical Horizontal Resolution Frequency Frequency (kHz) Horizontal Vertical (Hz) Resolution Frequency (kHz) Frequency (Hz) 31.46 59.94 640 x 480 31.50 60.00 640 x 350 31.46 70.09 720 x 400 31.46 70.08 31.47...
- Page 30 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
-
Page 31: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 32: Key Codes
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... -
Page 33: Usb To Serial Converter With Usb Cable
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. -
Page 34: Customer Computer
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &... -
Page 35: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 36: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 37 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 38 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 39 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 40 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 41 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 42 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...