Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Scitec 60010S
Summary of Contents for Scitec 60010S
- Page 1 600 Series Telephone User Guide Single-Line Models 6003S, 6005S, 60010S...
-
Page 2: Unpacking Your Telephone
Then place the handset in its cradle. Connect the free end of the coiled handset cord to the jack on LEFT SIDE of the telephone body, marked with a “handset” symbol. This jack is closer to the front of the telephone. -
Page 3: Adjusting Volume
2. Turn the telephone over so the telephone face is down. 3. Locate the wall-mounting bracket. Note the 4 retaining tabs on bracket. 4. Rotate the wall-mounting bracket so that the Scitec “Sun” designs are toward the bottom of the phone. - Page 4 Note that the telephone and device plugged into the DATA jack cannot both be “off-hook” at the same time, as the telephone and DATA jacks both share the same telephone line. Do not attempt to use Dataport for connecting the handset, headset, or for connecting telephone to PBX.
- Page 5 Authorization Form.” A simple one-page form and complete instructions will be sent to you, to be filled out and returned to Scitec. You will be asked to describe the failure symptoms of your telephone, provide the date purchased (and proof of purchase date if requested), and provide the name of the Scitec dealer or distributor from which the telephone was purchased.
Need help?
Do you have a question about the 60010S and is the answer not in the manual?
Questions and answers