Linea DOMO DO91702R Instruction Booklet page 41

· Never use the appliance when the cord or plug is damaged,
after malfunction or when the appliance itself is damaged. In
that case, take the appliance to the nearest qualified service
center for check-up and repair.
· It is prohibited to alter or modify the device and its
specifications.
· When disposing of the appliance, remove the plug from the
power socket, cut the power cord (as closely as possible to the
appliance), and remove the door to prevent playing children
getting an electrical shock or shutting themselves in the
appliance.
· The lamp in the appliance is intended for use in this cooling
device only. Do not use the lamp as a household light.
· Unplug the appliance when it is not in use, before assembling
or disassembling any parts and before cleaning the appliance.
Put all buttons and knobs into the 'off' position and unplug the
appliance by grasping the plug. Never unplug by pulling the
cord.
I INSTALLATION
· Never place this appliance near a gas stove or electrical stove
or in a place where it may come into contact with a warm
appliance.
· Always use the appliance on a steady, dry and level surface.
· Keep the cord away from sharp edges and hot parts or other
heat sources.
· Keep the ventilation openings free of obstructions.
· The appliance may not be used with an extension lead or a
multiple socket.
· Avoid long exposure to direct sunlight.
· Make sure that you have access to the plug of the appliance.
· Make sure the plug and cord are not crushed or damaged by
the back of the appliance. This can cause short circuits and, as
a result, overheating and fire.
· This is a heavy appliance. Be careful when moving it.
· This cooling unit is not intended for use as a built-in appliance.
· Do not place a power strip or other portable power supply
behind the appliance.
· After installation, it is advisable to wait 24 hours before
connecting the appliance to allow the oil to flow back in the
compressor.
www.domo-elektro.be
41
DO91702R