Set The Anti-Theft Code - Clarion NX404AU Owner's Manual

Audio Language: Set the Language for DVD Audio.
Subtitle Language: Set the Language for DVD subtitle.
Blinking LED: Set blinking LED On or Off.
DAB/TV(Option): Set the mode DAB/TV/Off
Screen Calibration: The function of it is to select the
TS Calibrate YES or NO.
Factory Default: The function is to select to load
factory default or not.

Set the Anti-Theft code

1. If your unit is unlocked, hold the [
more than 2 seconds, then the Anti-Theft setting
mode will display. Users can change anti-theft
code.
Touch [YES], the numerical keypad is displayed.
Enter the new password twice, then anti-theft code
is set and your unit is secured.
When the Anti-theft is "On", you need enter correct
Anti-theft code to turn the unit on. If you enter
wrong code three times, the unit is locked, and must
be unlocked by the professionals.
2. If your unit is secured, hold the [
than 2 seconds, then the Anti-Theft setting mode
will display. The numerical keypad is displayed,
enter the right code to unlock.
Note:
If the anti-theft code is lost or forgotten, a charge will
be incurred at the owner's expense by a Clarion service
station to unlock the NX404AU.
50 NX404AU
] button
] button more