Page 1
Towel warmer instruction manual Model OD-0704 SPECIFICATIONS Voltage: AC 120V Frequency: 60 Hz Rated power : 65 W (OD-0704-SS/BR) | 80 W (OD-0704-MB/MW) This towel warmer is intended for bathroom. Read the instructions carefully before using. Hardwired installation 3+1* 3+1* *The part is not in the installation boxes.
Page 2
Plug-in installation instructions 1. Identify the location of the holes needed to screw the product on the wall. 2. Drill holes in the wall. 3. Insert screw anchor into the holes. 5. Install the base with the screw. 4. Rivet the base onto the nut with the fixing screw.
Page 3
Hardwire installation instructions 1. Identify the location of the holes needed to screw the product on the wall . 2. Drill holes in the wall. 3. Insert screw anchor into the holes. 4. Cut the supply cable. Make sure to keep enough wire to go through the tube and to plug into the junction box.
Page 4
10. Press the button to turn the 9. Install the base with the screws. device ON or OFF. Select the drying temperature between 30° and 60 degrees Celsius (86 to 140 °F). Select the drying time from 1 hour to 8 hours.
Page 5
Odass warrants for a period of 5 years, sa- transferred to a third party and additional installation fees. Odass cannot be held responsible nitary porcelain products (toilet, lavatorie basins) limitations apply for commercial use.