Sanyo POA-FBOX130 Install Manual page 2

Option Filter kit
Type No. ： POA-FBOX-130
This filter is an option filter kit for preventing a projector from external dust. By
attaching this filter, a projector can be more powerfully prevented from external
dust. Moreover, filter maintenance can be performed easily. It attached in this kit
with the Filter unit, the Screw(M4x16), and the Installation manual.
FILTER UNIT
Before Installation
1.
Disassemble the Filter unit into two parts, a plate and a filter base.
Pull part(A) to the front side and pull the Filter base upward.
PLATE
A
FILTER BASE
2.
Remove the screw of a Projector cabinet
and remove the 2 filters.
(Keep the removed screw and filters.)
Installation procedure
3.
Insert 2 hook parts of the plate into the hole of intake vents of the cabinet, and
fix with a included screw (M4x16).
Insert 2 hook parts of the plate in the air intake
vents of the cabinet
AIR INTAKE VENTS
SCREW
4.
A filter base is attached in a plate.
Insert the 2 hook parts(B) of the side of a filter base into the
slots on the plate and Insert the 3 hook parts(C) of the lower
of a filter base into the slots on the plate.
Attach the Filter Base
SCREW(M4x16)
INSTALLATION
MANUAL
PLATE
A
FILTER BASE
FILTER
FILTER
SCREW
- 1 -
SCREW(M4x16)
B
C
- 2 -
Insert 5 hook parts of the filter
base into the slots and push
downward.
5.
Push the filter base downward until it is locked.
Filter Removal
Pull part(A) to the front and pull the
Filter base upward.
Filter can be separate three parts
Pull part(D) and pull the Filter-A and B upward.
D
FILTER-A
Filter care and cleaning
Clean the filter with brush or vacuum cleaner.
Caution:
Do not wash. It may result, a filter net damages.
ORDER REPLACEMENT FILTER
When the filter became old or it damages, filter can be ordered through your
dealer.
When ordering a filter, give the following Type No. to the dealer.
Replacement Filter Type No. : POA-FIL-130
PLATE
FILTER BASE
Push and fix.
A
A
FILTER BASE
- 3 -
FILTER-A
FILTER-B
1AA6P1P4819-- (IDYW)
- 4 -