Delta HL6700R Assembly Instructions page 2

Smartphone Holder
X Pro
Assembly instructions
Parts
A
x1 — Smartphone Holder
B
x2 — Spacer Rings (optional)
C
x1 — Mount Screw
D
x1 — Garmin Mount
®
E
x1 — Wahoo Mount
®
Tool Required
Allen Key
Remove stem cap and insert phone holder,
1
Using spacer rings as needed.
Reinstall stem cap and tighten stem bolt securely.
IMPORTANT NOTE
Never loosen the stem clamp bolts.
WARNING
Using phone device while riding can cause accidents resulting in serious injury.
Important: Nuts and bolts can loosen over time, resulting in serious danger should the item fall o while in motion.
Check frequently to ensure all bolts are properly tightened. Ensure the device ts snugly in the holder before riding.
Not for o -road use.
Delta Cycle Corporation
36 York Avenue, Randolph, MA 02368 USA
800-474-6615 / www.designbydelta.com
HL6800
A
Assembly video
Visit designbydelta.com/downloads
C
GARMIN OR WAHOO MOUNTING OPTIONS
® ®
Use Allen key (2.5mm) to remove mount screw.
1
(FIGURE 1)
Choose Garmin or Wahoo
®
2
arm. Tighten mount screw with Allen key (2.5mm).
(FIGURE 2)
FIGURE 1
GARMIN
®
Service:
Please do not return to store;
for immediate response email
service@designbydelta.com
D E
mount, position on to
®
FIGURE 2
WAHOO
®
B