Delta RS2300 Assembly Instructions

Single Bike
Ceiling Hoist
With Straps
Assembly instructions Assembly instructions
Parts
A A
x1 — Single Pulley (Back)
B B
x1 — Double Pulley (Front)
C C
x7 — Screws
D D
x2 — Pulley Hooks
E E
x1 — Cord Cleat
F F
x1 — Cord
G G
x2 — Strap
Tool (s) Required
Phillips Head
Screwdriver
WARNING
NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 50 LBS (23 Kgs) NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 50 LBS (23 Kgs)
BEFORE USE THOROUGHLY TEST THE HOIST FULLY WEIGHTED WITH THE ITEM INTENDED TO BE STORED, ENSURING BEFORE USE THOROUGHLY TEST THE HOIST FULLY WEIGHTED WITH THE ITEM INTENDED TO BE STORED, ENSURING
THE UNIT HAS BEEN INSTALLED SECURELY AND IS FUNCTIONING PROPERLY. THE UNIT HAS BEEN INSTALLED SECURELY AND IS FUNCTIONING PROPERLY.
MAKE SURE THAT THERE ARE NO OBSTRUCTIONS TO RESTRICT OPERATION OF THE HOIST ASSEMBLY AS WELL AS MAKE SURE THAT THERE ARE NO OBSTRUCTIONS TO RESTRICT OPERATION OF THE HOIST ASSEMBLY AS WELL AS
THE HOISTED ITEM; FOR EXAMPLE: VEHICLES, GARAGE DOORS AND OTHER EQUIPMENT. THE HOISTED ITEM; FOR EXAMPLE: VEHICLES, GARAGE DOORS AND OTHER EQUIPMENT.
DO NOT CUT THE CORD. DO NOT CUT THE CORD.
IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY. IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.
RS2300 RS2300
Drill
A A
C C
G G
IMPORTANT IMPORTANT
IT IS RECOMMENDED THIS ITEM BE INSTALLED IT IS RECOMMENDED THIS ITEM BE INSTALLED
BY A COMPETENT PROFESSIONAL BY A COMPETENT PROFESSIONAL
1/8" drill bit
(3mm)
B B
D D
E E
Stud Locator
Tape Measure
F F