Single Bike
Ceiling Hoist
With Straps
Assembly instructions
Assembly instructions
Parts
A A
x1 — Single Pulley (Back)
B B
x1 — Double Pulley (Front)
C C
x7 — Screws
D D
x2 — Pulley Hooks
E E
x1 — Cord Cleat
F F
x1 — Cord
G G
x2 — Strap
Tool (s) Required
Phillips Head
Screwdriver
WARNING
NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 100 LBS (46 Kgs). MAX CEILING HEIGHT: 12 FEET
NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 100 LBS (46 Kgs). MAX CEILING HEIGHT: 12 FEET
BEFORE USE THOROUGHLY TEST THE HOIST FULLY WEIGHTED WITH THE ITEM INTENDED TO BE STORED, ENSURING
BEFORE USE THOROUGHLY TEST THE HOIST FULLY WEIGHTED WITH THE ITEM INTENDED TO BE STORED, ENSURING
THE UNIT HAS BEEN INSTALLED SECURELY AND IS FUNCTIONING PROPERLY.
THE UNIT HAS BEEN INSTALLED SECURELY AND IS FUNCTIONING PROPERLY.
MAKE SURE THAT THERE ARE NO OBSTRUCTIONS TO RESTRICT OPERATION OF THE HOIST ASSEMBLY AS WELL AS
MAKE SURE THAT THERE ARE NO OBSTRUCTIONS TO RESTRICT OPERATION OF THE HOIST ASSEMBLY AS WELL AS
THE HOISTED ITEM; FOR EXAMPLE: VEHICLES, GARAGE DOORS AND OTHER EQUIPMENT.
THE HOISTED ITEM; FOR EXAMPLE: VEHICLES, GARAGE DOORS AND OTHER EQUIPMENT.
DO NOT CUT THE CORD.
DO NOT CUT THE CORD.
IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.
IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.
RS2300
RS2300
Drill
Assembly video
Visit designbydelta.com/downloads
A A
C C
G G
IMPORTANT
IMPORTANT
IT IS RECOMMENDED THIS ITEM BE INSTALLED
IT IS RECOMMENDED THIS ITEM BE INSTALLED
BY A COMPETENT PROFESSIONAL
BY A COMPETENT PROFESSIONAL
1/8" drill bit
(3mm)
B B
D D
E E
Stud Locator
Tape Measure
F F