Page 1
Assembly video Visit designbydelta.com/downloads Two Bike Rugged Upright Stand Assembly instructions HDRS6200 Parts x1 — Top Connector x2 — Top Pole x2 — Center Pole x2 — Bottom Pole x2 — Base Stand (Left + Right) x1 — Base Bracket x6 —...
Page 2
(FIGURE 2) FIGURE 2 FIGURE 3 Adjust position of arms before placing bike on stand. Delta Cycle Corporation Service: Please do not return to store; 36 York Avenue, Randolph, MA 02368 USA for immediate response email 800-474-6615 / www.designbydelta.com service@designbydelta.com...
Page 3
The height of the tray should be adjusted so that the rear wheel of the bike is barley o the ground level and that the tire is contacting the wheel stop on the base piece. FIGURE 5 011923 Delta Cycle Corporation Service: Please do not return to store; 36 York Avenue, Randolph, MA 02368 USA for immediate response email 800-474-6615 / www.designbydelta.com...