Dell P174G Service Manual page 80

Table 14. System setup options—System Management menu (continued)
System Management
Auto on Time
Intel AMT Capability
Enable Intel AMT Capability
Diagnositc
OS Agent Requests
Power-on-Self-Test Automatic
Recovery
Table 15. System setup options—Keyboard menu
Keyboard
Fn Lock Options
Lock Mode
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on
Battery
Device Configuration Hotkey Access
Table 16. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings
Warning and Errors
Fastboot
Extend BIOS POST Time
80 BIOS setup
By default, the option is disabled.
Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
By default Restrict MEBx Access option is enabled.
By default OS Agent Requests option is enabled.
By default Power-on-Self-Test Automatic Recovery option is enabled.
By default, the Fn lock option is enabled.
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Enables to change the keyboard illumination settings.
By default, the Disabled option is enabled.
Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 10 seconds option is enabled.
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Manages whether you can access device configuration screens through
hotkeys during system startup.
By default, the option is enabled.
Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Allows you to configure the speed of the UEFI boot process.
By default, the Minimal option is enabled.
Set the BIOS POST load time.
By default, the 0 seconds option is enabled.