Table of Contents
Advertisement
SU4/U3 (VHR-M439 GB) Tue. Feb. 02/1999
COPYING A TAPE
You can copy recordings (such as home videos) from one
tape to another using two VCRs.
OUT
VIDEO
AUDIO
VCR 1: To play back
1
Connect the VCRs as shown.
2
Insert the recorded cassette into VCR 1.
3
Insert a blank tape into VCR 2.
4
Set the desired recording speed on VCR 2.
5
Turn on the TV and set it to channel 3 or 4.
If you use this model as VCR 2 to record:
œ Press the INPUT button on VCR 2 to select the rear
input jacks.
The AV indicator "L1" is displayed instead of a channel
number.
MAINTENANCE
Head Care and Cleaning
œ Under normal conditions, the heads should not require
cleaning. If you suspect a problem, contact a
factory-authorized service center.
DO NOT USE SOLVENTS OR OTHER TYPES OF CLEANSERS. THESE CHEMICALS CAN CRACK OR
DISCOLOR THE CABINET.
Audio connection cable
(not supplied)
Video connection cable
(not supplied)
VIDEO
AUDIO
VCR 2: To record
6
Press the TV/VCR button on VCR 2 to select the
VCR mode.
7
Place VCR 2 in the record/pause mode.
8
Press PLAY on VCR 1.
9
When the tape in VCR 1 has reached the desired
point, press (release) PAUSE/STILL on VCR 2.
Recording begins.
F
Press STOP (or STOP/EJECT on the front panel) on
both VCRs when finished.
Cabinet Cleaning
œ Clean the outside of the cabinet with a clean, soft cloth,
moistened with lukewarm water and wrung dry.
37
IN
TO TV
OUT
TV
Advertisement
Table of Contents
