8
#
Icon
Function
15
MENU
16
MOUSE_Left/
Right Click
17
MOUSE_Four
directional select
keys
18
MODE
19
VOLUME +/-
20
PAGE
21
Prev
Next
Play/Pause
Stop
22
VGA
23
S-VIDEO
24
INFO
25
COMPONENT
26
VIDEO
27
SD/USB A
28
USB B
29
HDMI™/DVI
30
LAN/WiFi
31
KeyPad 0~9
32
ASPECT RATIO
33
RESYNC
34
MEDIA_HOME
Note: Functions vary depending on model definition.
Description
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
Left-/right-click buttons are on the left and right,
respectively; the center button works as a multidirectional
pointer stick. To enable this function, an USB cable must be
connected to projector from your PC.
Press "MODE" to select the display mode.
Increases/decreases the volume.
For computer mode only. Use this button to select the next
or previous page. This function is only available when
connected to a computer via a USB cable.
No function.
No function.
No function.
No function.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
To change source to S-Video.
No function.
Press "COMPONENT" to change source to Component
video. This connection supports YPbPr (480p/576p/720p/
1080i) and YCbCr (480i/576i).
To change source to COMPOSITE VIDEO.
No function.
For USB control and firmware upgrade.
Press "HDMI™/DVI" to change source to HDMI™ (no DVI
function).
Press "LAN/WiFi" to display the image which is wire or
wirelessly transmitted from the PC to the projector via the
"Acer LAN webpage management" utility.
Press "0~9" to input a password in the "Security".
Choose the desired aspect ratio.
Automatically synchronizes the projector to the input
source.
No function.