Ultrak 360 - Stopwatch Manual

FEATURES

• Time/Calendar display: Hour, minute, second, month, year, date and day
• Stopwatch: 1/100 second up to 10 hours
• 30 lap and split recorded
• Maximum 99 lap displayed
• 3 ATM water resistant
• EL light
• Alarm
  

1. LAP/RESET
2. RECALL
3. MODE
4. START/STOP
5. EL LIGHT

DISPLAY SYMBOLS

Normal Time Mode

Lap Mode

Split Mode

Alarm Mode

TIME / CALENDAR SETTING

1. Press button C to go to Normal Time Mode.
2. Press button B for 2 seconds, second digit flashing.
3. Press button D to reset the second to 00 when the second is less than30,add 1 minute when the second is more than or equal to 30.
4. Press button A to change the setting items: minute-hour-12/24 hourmonth-date-year.
5. Press button D to increase the setting value.
6. Press button B to exit.
   

ALARM SETTING MODE

1. From the normal time display, press button C 3 times to enter into Alarm mode.
2. Hold button B for 2 seconds, hour digit flashes.
3. Press button D to increase the setting value.
4. Press button A to step the setting items
5. Press button D to increase the value.
6. Press button B to exit.
7. Press button D to turn the alarm on or off.
8. Press button C to turn to the Normal Time Mode.
   Note: When the alarm is sounding, it lasts for 1 minute. Press any button to stop it.
   

STOPWATCH MODE

Press button C to go to Lap Mode

• Simple Measurement: D-D-A
• Accumulated elapsed time Measurement: D-D-D-D-A
• Lap Measurement (Total 30 lap memory measurement and 99 lap measurement)
  For Example: 5 Lap measurement: Button D-A-A-A-A-D
  

Recall Memory

1. Press button B and then press button A to view different lap records. The display will run through in turn: Lap 1> Lap 2> Lap 3> Lap 4> Lap 5> Lap 1
2. Press button D the display is reverse from above.
   

3. Press button B to go back to the Lap Mode.
4. Press button A to reset the value then start a new game.
5. To delete the records, press D-D-A.

• Split Measurement
  Press button C to go to Split mode.
  For Example: 5 splits measurement: Button D-A-A-A-A-D
  

Recall Memory

1. Press button B and then press button A to view different splits records.
   The display will run through in turn: Lap 1> Lap 2> Lap 3> Lap 4> Lap 5> Lap 1>
   

2. Press button B then press button D the display is reverse.
3. Press button B to turn to the Split Mode
4. Press button A to reset the value then start a new game.
5. To delete the records, press D-D-A.

BATTERY REPLACEMENT

When the display becomes dim, change a new battery at once. Screw out the case back and change a new CR2032 battery. Pay attention to the correct polarity when changing battery.