Page 1
ULTRAK 498 STOPWATCH WITH PRINTER INSTRUCTION MANUAL BK233.1 Printed in China...
Page 2
FEATURES: CHRONOGRAPH 2000 memories Segregated memory (capability to memorize LAP times of different races) User Selectable LAP/SPLIT or LAP/SPEED display Average and best lap time display Automatic release of LAP time after 10 seconds to allow progress monitoring Data can be printed at operation or selectively by race later Data can be uploaded to computer through upload cable with software (cable and software optional)
Page 3
Press B to get the 1st LAP time. The LAP time is shown at the top row, the SPLIT Press B to display the 2nd LAP time, as shown in Fig.5. time at the middle row and the running total time is shown at the lower row, as shown in Fig.3.
Page 4
Press D again to show the average LAP time, as shown in Fig.12. Press D to recall the 2nd LAP data, as shown in Fig.10. Fig. 12 Fig. 10 Press D again to show the Best LAP time, as shown in Fig.13. Press D again shows the stopped time, as shown in Fig.11.
Page 5
** BASE 3 STROKE/FREQ -- if the distance is set to 180 and time unit to Press and hold B button for 2 seconds will go into the SET TIMER mode with seconds, the speed reading for 3 strokes gives the number of strokes / minute. the hour digit of the 1st timer blinking.
Page 6
Pressing B at the UPLOAD ALL mode will go to the UPLOAD RACE mode with Press and hold B button for 2 seconds will go into the TIME SET mode with the display as shown in Fig.23. AL HOUR blinking. Press A to set the AL HOUR. Press B to select digits in the Pressing A in this mode will only upload the memories in this race.
Page 7
**: Do not pull paper out from the printer, this will cause damage to the printer. DigiLink UPLOAD PROGRAM MANUAL For replacing the paper roll before it is used up, tear the paper off and press the A) Digilink program & driver installation ‘...
Page 8
4) Delete records: To delete record, first select unwanted race record by clicking the down arrow button next to it in 'Record Cell'. Click 'DELETE RECORD' then click 'OK' to accept the delete record dialog. 5) Export files: The DigiLink program allows user to export files in the text format. Select 'EXPORT' then click 'TEXT' from the 'FILE' pull down menu.
Need help?
Do you have a question about the 498 and is the answer not in the manual?
Questions and answers