ENGLISH
Instructions Ultrak 360
FEATURES
•
Time/Calendar display: Hour, minute, second, month, year, date and day
•
Stopwatch: 1/100 second up to 10 hours
•
30 lap and split recorded
•
Maximum 99 lap displayed
•
3 ATM water resistant
•
EL light
•
Alarm
B
C
DISPLAY SYMBOLS
Normal Time Mode
Month
Day
Date
Number of lap
12/24 hour
Second
Indication
Hour
Minute
Split Mode
Current Split time
Stopwatch
TIME / CALENDAR SETTING
1. Press button C to go to Normal Time Mode.
2. Press button B for 2 seconds, second digit flashing.
3. Press button D to reset the second to 00 when the second is less
than30,add 1 minute when the second is more than or equal to 30.
4. Press button A to change the setting items: minute-hour-12/24 hour-
month-date-year.
5. Press button D to increase the setting value.
6. Press button B to exit.
Second Setting
Minute Setting
Year Setting
Date Setting
ALARM SETTING MODE
1. From the normal time display,press button C 3 times to enter into
Alarm mode.
2. Hold button B for 2 seconds, hour digit flashes.
3. Press button D to increase the setting value.
4. Press button A to step the setting items
5. Press button D to increase the value.
6. Press button B to exit.
7. Press button D to turn the alarm on or off.
8. Press button C to turn to the Normal Time Mode.
Note: When the alarm is sounding, it lasts for 1 minute. Press any button
to stop it.
Hour Setting
Alarm Mode
A: LAP/RESET
B: RECALL
C: MODE
D: START/STOP
E: EL LIGHT
Lap Mode
Current lap time
Stopwatch
Alarm Mode
Time
Bell
12/24 Hour
Alarm mode
Indication
Alarm Time
Hour Setting
12 / 24 hour Setting
Month Setting
Minute Setting
STOPWATCH MODE
Press button C to go to Lap Mode
Simple Measurement: D-D-A
Accumulated elapsed time Measurement: D-D-D-D-A
Start
Stop
Start
Restart
Lap Measurement (Total 30 lap memory measurement and 99 lap
measurement)
For Example: 5 Lap measurement: Button D-A-A-A-A-D
Start
Lap1
Continuous Counting
Lap5(Stop)
Lap4
Continuous Counting
Recall Memory
1. Press button B and then press button A to view different lap records.
The display will run through in turn: Lap 1> Lap 2> Lap 3> Lap 4> Lap 5> Lap 1
2. Press button D the display is reverse from above.
Lap 1 Time
Lap 2 Time
Accumulated
Accumulated
Lap 4 Time
Accumulated
3. Press button B to go back to the Lap Mode.
4. Press button A to reset the value then start a new game.
5. To delete the records,press D-D-A.
Split Measurement
Press button C to go to Split mode.
For Example: 5 splits measurement: Button D-A-A-A-A-D
Split 1
Start
Split
Split
Continuous Counting
Split 5(Stop)
Split 4
(Lap 1+ Lap 2+
(Lap 1+Lap 2+
Lap 3+ Lap 4+ Lap 5)
Lap 3+Lap 4)
Continuous Counting
Recall Memory
1. Press button B and then press button A to view different splits records.
The display will run through in turn: Lap 1> Lap 2> Lap 3> Lap 4> Lap 5> Lap 1>
Lap 2 Time
Lap 1 Time
Accumulated
Accumulated
Lap 4 Time
Accumulated
2. Press button B then press button D the display is reverse.
3. Press button B to turn to the Split Mode
4. Press button A to reset the value then start a new game.
5. To delete the records,press D-D-A.
BATTERY REPLACEMENT
When the display becomes dim, change a new battery at once. Screw
out the case back and change a new CR2032 battery. Pay attention to
the correct polarity when changing battery.
Stop
Reset
Stop
Reset
Lap2
Continuous Counting
Lap 3
Continuous Counting
Lap 3 Time
Accumulated
Lap 5 Time
Accumulated
Split 2
(Lap 1+Lap 2)
Continuous Counting
Split 3
(Lap 1+ Lap 2+Lap 3)
Continuous Counting
Lap 3 Time
Accumulated
Lap 5 Time
Accumulated
P17521000050
Need help?
Do you have a question about the 360 and is the answer not in the manual?
Questions and answers