Table of Contents
Advertisement
PowerMaxx
1.0
PowerMaxx overview
The PowerMaxx is designed to provide battery backup to pump stations in the event of a mains failure.
It has been specifically designed to meet the requirements of the pump industry. The PowerMaxx monitors
any overcurrent situation which might occur due to a faulty pump/s, or blockage in the associated valves/
pipework. It also has the ability to connect to other components in the MaxxConnect™ family, such as an
AlertMaxx and MessageMaxx unit.
2.0
Box contents
•
1 x PowerMaxx Unit - Battery supplied internally, but disconnected on delivery
•
4 x Large Cable Glands & Nuts
•
2 x Large Blanking Plugs
•
1 x Small Cable Gland (for MaxxConnect™) & Nut
•
1 x Small Blanking Plug
•
1 x 3m length of MaxxConnect family cable
•
1 x Installation & Operating Instructions (this document)
•
1 x Chamber Location Sticker Sheet (for Spurs)
3.0
Technical information
Size (without cable glands)
Weight
Mains supply
Internal battery
Power (standby)
Power (charging)
Visual Display
Operating temperature
Approximate Installation time
4
The PowerMaxx should be installed by a qualified tradesperson.
PowerMaxx Specification
CAUTION!
W: 155mm x D: 425mm x H: 300mm
19.5kg
200-250V AC (50Hz)
24V - 22Ah
<3W
55W
Red, Blue, Green LED
5-35°C
30 minutes
For technical support, please call 01279 757400
Advertisement
Table of Contents
