Sibata MP-2N Quick Start Manual

Operation Manual
The MP-2N minipump is a small, lightweight, portable air suction pump that runs on batteries. The stroke can be changed depending on
the flowrate used, which reduces power consumption and pulsations during sampling. Be sure to carefully read this operation manual
before using the product.
Before Using the Product
●
Place this product on a level and stable surface.
●
This product is not explosion proof, so do not use it near combustible or flammable materials.
●
Do not modify or repair: Never disassemble or modify this product, as doing so will void the Sibata warranty. It could also result in
an unforeseen failure or accident.
●
Have any product failures repaired promptly. Never operate the product with an unrepaired failure or attempt to repair it yourself.
Doing so could result in an unforeseen accident.
●
To clean dirty surfaces, wipe with a soft dry cloth (moistened with a neutral detergent for stubborn dirt).
●
Never attempt to install the batteries with the polarity reversed. Doing so could result in heat or fire, causing a product failure.
●
If the product will not be used for an extended period, be sure to remove the batteries. Leakage from the batteries could cause a product
failure.
■
Specifications
Item Code
Model
Max. Flowrate
Variable Flowrate
Range
Max. Suction Pressure
Power Supply
Motor Operating Life
Material
Dimensions
Weight
Accessories
Note: Due to product improvements, the product shape, dimensions,
specifications, and other product information are subject to change
without notice, to the extent that they do not affect product
applicability or functionality.
■
Troubleshooting
Symptom
The batteries are not installed.
The pump does
The batteries are not oriented correctly.
not operate after
The batteries are depleted.
turning the
Problem with the AC adapter (if the pump operates
[POWER] switch
properly when using the batteries.)
ON.
The motor has failed or malfunctioned.
Damage to the diaphragm, or valve leakage
The pump
Problem with the suction hose (cracks etc.)
operates, but
there is no
The filter is clogged.
suction.
MP-2N Minipump
(Be sure to read the following and use the product with sufficient care.)
080860-2
MP-2N
2.5 L/min (Unloaded)
0 to 2.5 L/min
(Combined stroke and variable voltage)
33 kPa
Eight AA batteries
AC Adapter : Optional
Approx. 1,000 hours of continuous use
(Differs with the set flowrate and the load
pressure drop)
Pump unit: Glass fiber reinforced
thermoplastic polyester resin
Diaphragm and valve: Silicone rubber
W115 × D43 × H81 mm (Excluding protrusions)
About 0.5 kg
Eight AA batteries (for confirming functionality),
one Phillips screwdriver and
one slotted screwdriver
Cause
*
Purchase the following separately if needed based on the
intended application.
PA-213 AC Adapter (Item Code 080810-213)
■
Warranty
If a Sibata product fails within one year from date of purchase, it will be
*
repaired free of charge. To request repairs, be sure to contact the
distributor where you purchased the product. Be sure to provide the
item code, product name, model number, serial number, a description
of the problem, and other relevant information. The warranty excludes
consumable parts included with the product, products without the
purchase date or distributor information recorded, and products for
which warranty information was revised.
A repair service fee is charged in the following cases.
(1) Failures or damage caused by usage methods
(2) Failures or damage resulting from repairs or modifications not
performed by Sibata
(3) Failures caused by abuse or inadequate maintenance
(4) Failures or damage resulting from fires, earthquakes, acts of nature,
or other unavoidable events
(5) Failures or damage due to transportation, relocation, falling,
vibration, or other such events after purchase
(6) Failures or damage resulting from using consumables not specified
by Sibata
Insert eight AA batteries at the specified position.
Re-insert the batteries with the correct orientation.
Replace the batteries.
Replace the AC adapter.
Request repairs.
Request repairs.
Replace the hose.
Remove the suction hose connector, and clean the filter inside.
If the filter is very dirty, replace it.
CODE 080860-2
Remedy