Handling Precautions; Removing The Stand (Optional); Wall Mounting (Optional); Positioning Precautions - Sanyo DP50747 Owner's Manual

HANDLING PRECAUTIONS

•
Handle the Plasma HDTV carefully when
installing. Do Not Drop.
•
Throughout the installation process, han-
dling by more
recommended.
•
When removing the stand, use a working
space that's larger than the screen size. The
work surface must be flat, covered with a soft
cloth or blanket to protect the screen surface.
•
Before placing the Plasma HDTV face down,
make sure there are no objects under the
screen. Leaving any object may cause
damage on the screen surface.
REMOVING THE STAND
Tools Needed: Phillips screwdriver
IMPORTANT NOTE:
padded or cushioned surface that is larger than
the screen size to protect the screen and
finish. Handling by more than two people is
recommended.
1 Remove four (4) screws from the metal bracket.
CAUTION
: Hold the stand firmly as you
remove the last screw.
2 Carefully remove the stand.
Need help?
4
Visit our Web site at
than two people
(Optional)
Place HDTV face down on a
www.sanyoctv.com
WALL MOUNTING
Use the screws that are threaded into four (4) of
the six (6) inserts on the back of your Plasma
HDTV to secure it to a wall mounting kit.
UNIVERSAL standard interface:
is
480 x 200 and 480 x 360
Note: Wall Mounting kit is not supplied.
Mounting screws measurements:
M6 Diameter, Length—14mm (min.) 18mm (max.)

POSITIONING PRECAUTIONS

•
Place this Plasma HDTV as indicated here. Failure
to do so may result in a fire hazard. Allowing the
proper amount of space at the top, sides, and
rear of the Plasma HDTV cabinet is critical for
proper air circulation and cooling of the unit. The
dimensions shown here indicate the minimum
space required. If the Plasma HDTV is to be built
into a compartment or similarly enclosed, these
minimum distances must be maintained.
•
Do not cover the ventilation slots on the Plasma
HDTV. Heat build-up can reduce the life of your
Plasma HDTV, and can also be dangerous.
•
If Plasma HDTV is not to be used for an extended
period of time, unplug it from the power outlet.

PROTECTING THE PLASMA SCREEN

The screen can be damaged if it is not maintained
properly. Do not use hard objects such as hard
cloth or paper. Do not use excessive pressure
when cleaning the screen,
as it can cause permanent
discoloration or dark spots.
NEVER spray liquids on the
screen.
1-800-877-5032
or Call
(Optional)