Picture Rotation (Screen Saver); Energy (Power) Saver; White Pattern (Panel Repair) - Sanyo DP50747 Owner's Manual

PICTURE ROTATION
Displaying a still picture for a long time may cause
an "afterimage" or "ghost" on the screen. To neu-
tralize this situation, use Picture Rotation function.
Use the CURSOR LM keys to highlight Picture
1
Rotation. Press ENTER.
Use the CURSOR LM keys to select On or Off.
2
NOTE: When Picture Rotation is set to ON, the HDTV
automatically changes the display position every
15 minutes to avoid afterimage.

ENERGY (POWER) SAVER

This power saving feature reduces the backlight
brightness level. The options are:
•
OFF—power consumption is normal.
•
LOW—power saving level is low and the back-
light brightness level is lower than normal.
•
HIGH—power saving level is high and the back-
light brightness is set to the lowest level.
Use the CURSOR LM keys to highlight
1
Energy Saver. Press ENTER.
Use the CURSOR LM keys to select Off, Low,
2
or High.
NOTE:The Energy Saver settings level varies with
the Picture / Sound mode.
Need help?
16
Visit our Web site at
(SCREEN SAVER)
www.sanyoctv.com
WHITE PATTERN
Use feature to repair the Plasma screen.
If an afterimage occurs, use the White
Pattern feature immediately to repair the panel.
The more severe the afterimage, the longer the
curing process may take. It may be impossible to
repair all cases of afterimage burn.
The sooner you remove a still picture and activate
White Pattern, the more likely it is that the panel
can be repaired.
Use the CURSOR LM keys to highlight White
1
Pattern. Press ENTER.
Use the CURSOR LM keys to select On.
2
NOTES: When White Pattern is activated the screen will
instantly turn completely white. The On time is
automatically set for 30 minutes.
Pressing any key except VOLUME LM, MUTE,
and AUDIO will cancel the curing process and
return the HDTV to normal viewing.
Afterimage (or image burn) is not covered
under warranty.
1-800-877-5032
or Call
(PANEL REPAIR)