UPV75 Series
Installation of Inner Door With Gasket (cont.)
Step 6. Replace outer jacket burner access door.
Step 7. To resume operation follow the instructions located on the lighting instruction label or
the lighting instructions located in the installation and operation manual.
Stripped fastener connections may allow for seal breach of inner door.
A seal breach may result in a fire or explosion causing property damage,
personal injury or death. Do not over tighten screws in steps 2, 4 and 5.
36
36
UPV75 SERVICE PROCEDURE XIII
Inner Door/Gasket Removal, Inspection
& Replacement
WARNING