Bike Assembly; Deploy The Product - Youin Rio User Manual

Bike Assembly

Deploy the Product

1- If the pedals come disassembled, you must screw them into the cranks of your
e-bike, the one marked as R on the right side and the L on the left (looking towards
the handlebar).
2- Raise the handlebar to its vertical position and close the locking lever (picture 2).
3- Rotate the handlebar to put it in the desired position (picture 3).
4- Adjust the saddle to the desired height (picture 4).
Picture 1 Picture 2 Picture 3
Picture 4
4
YOUIN RIO