Before Operation - Dvd Part; General Explanation; On-Screen Display - Sanyo DVW-7100 Instruction Manual

Before Operation - DVD Part

Caution:
Before using the remote control, press the DVD button
to select the device to be operated.

General Explanation

This manual gives basic instructions for operating the
DVD+VCR. Some DVDs require specific operations or
allow only limited operations during playback. When this
occurs, the symbol appears on the TV screen, indi-
cating that an operation is not permitted by the
DVD+VCR or is not available on the disc.

On-Screen Display

General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
On-screen display operation
1 1
Press DISPLAY during playback.
2 2
Use v/V to select an item.
The selected item will be highlighted.
DVD
Items
Title Number
Chapter Number
Time search
-:--:--
Audio language
and Digital Audio
3/2.1 CH
Output mode
Subtitle language
Angle
Sound
Function
(Use v/V to select desired item)
Shows the current title number and total number of
1 / 3
titles, and skips to the desired title number.
Shows the current chapter number and total number of
1 / 12
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
1 ENG
encoding method, and channel number, and
D
changes the setting.
Shows the current subtitles language, and
1 ENG
changes the setting.
Shows the current angle number and total number of
1 / 1
angles, and changes the angle number.
Shows the current sound mode, and
Normal
changes the setting.
3 3
Use b/B to change the setting of an item.
The number buttons can also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER ( ) to execute the setting.
Temporary Feedback Field Icons
Repeat Title (DVD)
Title
Repeat Chapter (DVD)
Chapter
Repeat A-B
A - B
Repeat Off
Off
Resume play from this point
Action prohibited or not available
otes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
You can change the desired status only when "b B"
mark appears on the On-screen display menu item.
Selection Method
b / B, or Numbers,
SELECT/ENTER
( )
b / B, or Numbers,
SELECT/ENTER
( )
Numbers,
SELECT/ENTER
( )
b / B, or
AUDIO
b / B, or
SUBTITLE
b / B, or
ANGLE
b / B
17