Information Codes - Samsung DV8 TA2 Series User Manual

Troubleshooting

Information codes

If the dryer fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Information
code
tC
tC5
dC
HC
5C
AC6
3C
FIL+tEr
(Buzzer rings)
For any codes not listed above, or if the information code continues to appear, call for
service.
52 English
DV5000T_DC68-04209F-00_EN.indd 52
Meaning
Air temperature sensor
issue
Compressor temperature
sensor issue
Running the dryer with door
open
Compressor overheat
Water tank full
Drain pump is out of order
Check communications
between the main and the
inverter PBAs.
Check the motor for
operation.
Heat exchanger needs to be
cleaned
Action
Clean the lint filter and/or heat
exchanger. If this continues, call for
service.
Wait 2-3 minutes. Turn the power on
and restart.
Close the door and restart.
If this continues, call for service.
Call for service.
Empty the water tank, turn the
power on, and restart. If this
continues, call for service.
• Depending on the state, the
dryer may automatically returns
to normal operation.
• Turn the dryer off and turn it on
again. Then, restart the cycle.
• If the information code continues
to appear, call for service.
• Try restarting the cycle.
• If the information code continues
to appear, call for service.
Clean the heat exchanger.
2020/9/8 14:05:50