Table of Contents
Advertisement
Step 2.
Plug in the computer and charge the battery to 100%.
The default power plan
A power plan is a collection of power-saving settings made available by an operating system. With a power
plan, you can set idle time-outs for different hardware components to enter a low-power state. The default
power plan and some of its idle time-out settings are listed below for computer models pre-installed with
Windows.
The listed settings are active when the computer is connected to an electrical outlet. If your computer include
a built-in battery pack, a different collection of time-out settings is set to take effect when the computer is
operating on battery power.
Table 8. Default power-saving settings
Power plan
Turn off the display
Put the computer to sleep
Note: To wake the computer from the sleep state, press the power button or any key on the Bluetooth
keyboard.
Change or customize a power plan
You can customize the power-saving settings for the default power plan according to your usage of the PC.
Type power plan in the Windows search box and select Choose a power plan in the matched
Step 1.
results.
Step 2.
Select Change plan settings and change the time-out settings for turning off the display and
putting the computer to sleep.
Note: If you want to change other time-out settings, select Change advanced power settings.
Step 3.
After changes are made, select Save changes.
Balanced
After 5 minutes
After 5 minutes
.
Chapter 3
Maximize productivity with Yoga Book 9 13IRU8
29
Hide quick links:
Advertisement
Table of Contents
