Slide Show - Sanyo VPC-S1414 Instruction Manual

Slide Show

The slide show function enables you to playback your still images automatically in order one image at a
time.
To view slideshow:
1. From the Playback menu, select Slide Show. The Slideshow menu appears.
2. Set the slide show settings.
3. Select Start, then press the OK button to start the slide show.
4. During slideshow, press the OK button to pause slide show.
5. Use the or
show.
6. Press the OK button to apply selected option.
To change slide show settings:
1. From the Slide show menu, use the
move through the selections.
2. Select Interval setting. Press the
Choose among the available interval settings: 1 sec., 3
sec., 5 sec., and 10 sec.
3. Select Transition setting. Press the
adjust. Choose among the available transition settings:
4. Select Repeat setting. Press the
Available settings are: Yes, No.
Protect
Set the data to read-only to prevent images from being erased by mistake.
A protected file has a lock icon
To protect files:
1. From the Playback menu, select Protect.
2. The Protect submenu is displayed on the LCD monitor.
Available select settings:
• Single. Select one file to lock/unlock.
• Multi. Select multiple files from the thumbnail view to
lock/unlock.
• Lock All. Lock all files
• Unlock All. Unlock all files.
To protect/unprotect a single file:
1. Select Single in the Protect submenu, the images are
displayed on the LCD monitor in single navigation mode.
2. Use or keys to scroll the display.
3. When the desired file is displayed on the LCD monitor,
press the OK button to select Lock/Unlock.
4. To close the protect/unprotect function and go back
Playback menu, select Exit.
keys to move through the options. Select whether to Continue or Exit the slide
or
or
or
.
or keys to adjust.
when viewed on Playback mode.
keys t to
keys to adjust.
keys to
50