Sanyo VPC-S1414 Instruction Manual page 74

Do not throw the battery in the
fire or subject it to heat
• Doing so may cause the insulation to
melt, damage the gas discharge valve
and safety mechanisms, or ignite the
battery fluid, resulting in fire or
explosion.
Do not drop, hit, trample, or
submit the battery to strong
shocks
• If the safety mechanisms and protective
devices are broken, an abnormal
chemical reaction may occur inside the
battery, or cause the battery to catch
fire, explode, leak or spew battery fluid,
or generate heat.
Do not allow the battery to come
into contact with fresh or salt
water, or allow the terminals to
become wet
• If the safety mechanisms and protective
devices are damaged by corrosion, an
abnormal chemical reaction may occur
inside the battery, or cause the battery
to catch fire, explode, leak or spew
battery fluid, or generate heat.
Use only the supplied or specified
docking station and AC
adaptor/charger
• If another charger is used, the battery
pack may be overcharged, or recharged
with an abnormal voltage, causing an
abnormal chemical reaction to occur, or
cause the battery pack to catch fire,
explode, leak or spew battery fluid, or
generate heat.
Use the battery pack only in the
specified device
• If the battery pack is used in a device
other than that specified, it may cause
an abnormal voltage flow, or cause the
battery pack to catch fire, explode, leak
or spew battery fluid, or generate heat.
Do not peel or damage the outer
casing
• Damaging the outer case, inserting
nails, hitting with a hammer, stepping on
the battery, etc. may cause a short
circuit inside the battery or cause the
battery to catch fire, explode, leak or
spew battery fluid, or generate heat.
DANGER
DANGER
DANGER
DANGER
DANGER
DANGER
73
WARNING
WARNING
WARNING
—
WARNING
WARNING