GeoVision GV-Storage System V2 Quick Start Manual page 25

Select Add this connection to the list of Favorite Targets and click Advanced.
5.
Select Local Adaptor as Microsoft iSCSI Initiator, select Initiator IP as the host IP and
6.
select Target Portal IP as iSCSI data port 1. If the CHAP authentication is enabled at
the storage system, select Enable CHAP log on and type a valid user name and target
secret (password). Click OK.
Figure: In this example, the Host IP address is 192.168.1.100 and the iSCSI data port 1
is 192.168.1.1.
22