Panasonic SC-PM702 Operating Instructions Manual page 13

Connecting a device
█
Preparation
If this system is connected to a Bluetooth
1
Press [ ].
"BLUETOOTH READY" is shown.
2
Select "SC-PM702/PM704" or "SC-PM700" from the Bluetooth
The name of the connected device is shown for a few seconds.
3
Start playback on the device.
Note:
• A device must be paired to connect.
• This system can only connect to one device at a time.
• When "BLUETOOTH" is selected as the source, this system will automatically try to connect to the last
connected device. ("LINKING" is shown during this process.)
Disconnecting a device
█
While a Bluetooth device is connected
®
1
Press [PLAY MENU] repeatedly to select "DISCONNECT?".
2
Press [R, T] to select "OK? YES" and then press [OK].
"BLUETOOTH READY" is shown.
To cancel, select "OK? NO".
Using the main unit
Press and hold [–
Note:
A device is disconnected when you:
– Select a different source.
– Move the device out of the maximum range.
– Disable the Bluetooth
– Switch off the system or the device.
device, disconnect it (~13).
®
PAIRING] until "PAIRING" is shown.
transmission of the device.
®
menu of the device.
®
13