Eu Declaration Of Conformity; Safety Precautions; In Using - Pylontech P-Combiner-HV-3 Instruction Manual

1.2 EU Declaration of Conformity

within the scope of the EU directives
•
Restriction of the use of certain hazardous substances 2011/65/EU (L 174/88,
June 8,2011) and 2015/863/EU (L 137/10, March 31,2015) (RoHS)
•
Waste electrical and electronic equipment 2012/19/EU (L 197/38, 24.7.2012)
(WEEE)
•
Low-voltage switchgear and controgear assemblies - Part 2: Power switchgear and
controlgear assemblies (IEC61439-2)
Pylon Technologies Co., Ltd. confirms herewith that the products described in this
document are in compliance with the fundamental requirements and other relevant
provisions of the above mentioned directives. The entire EU Declaration of Conformity
can be found at en.pylontech.com.cn.

1.3 Safety Precautions

Reminding
1) It is important and necessary to read the user manual carefully before installing or
using. Failure to do so or to follow any of the instructions or warnings in this
document can result in electrical shock, serious injury, or death, or can damage
battery, potentially rendering it inoperable, which is out of product warranty scope.
2) Do not connect power terminal reversely.
3) Please contact the supplier within 24 hours if there is something abnormal.
4) Do not expose to flammable or harsh chemicals or vapors.
5) Do not connect with PV solar wiring directly.
6) Do not connect with AC power.
7) Any foreign object is prohibited to insert into any part of box.
8) The warranty claims are excluded for direct or indirect damage due to items above.

1.4 In Using

1) If any operation required or fuse need replacement, all the power source such as
battery, inverter must be turned off and all the cable shall be completely disconnected.
2) It is prohibited to connect different battery in parallel through the P-Combiner box.