Input
Input Source and System Selection
Press the INPUT button on the top control or the INPUT buttons on
the remote control (see below) to choose an input source.
✔
Note:
• Before selecting an input source with these buttons, each input
must be set on a proper signal form via menu operation (see on
pages 25 – 26).
INPUT buttons on the remote control
Press the VIDEO, S-VIDEO, C1, C2, H1, H2, or PC buttons on the
remote control according to the input source.
VIDEO
When the video signal is connected to the VIDEO
jack, press VIDEO.
S-VIDEO
When the video signal is connected to the S-VIDEO
jack, press S-VIDEO.
C1
When the video signal is connected to the
COMPONENT 1 jack, press C1.
C2
When the video signal is connected to the
COMPONENT 2 jack, press C2.
H1
When the video signal is connected to the HDMI 1
terminal, press H1.
H2
When the video signal is connected to the HDMI 2
terminal, press H2.
PC
When the computer signal is connected to the
COMPUTER connector, press PC.
✔
Note:
• When switching from HDMI1 to HDMI2 or vice versa, the signal
may be interrupted for a moment depending on the equipment.
24
Top Control
INPUT button
Remote Control
INPUT buttons
INPUT button
Video
S-video
Component 1
Component 2
HDMI 1
HDMI 2
Computer