Remote Control - Sanyo PLV-Z3000 Owner's Manual

Remote Control

e w
r
t
y
u
i
o
q POWER ON/STAND-By button
Turn the projector on or off (pp.18, 19).
w RESET button
Reset to the previous figure.
q
This function is limited to when selecting the Image Adjustment
(pp.28 – 33) and Picture Adjustment (p.34).
e LIGHT button
Light up the remote control buttons for about 10 seconds
(p.22).
r MENU button
Open or close the On-Screen Menu (p.20).
@1
t POINT
Select an item or adjust the setting values in the On-Screen
Menu.
y SCREEN button
@0
Select a screen size (pp.22, 35
u BRIGHTNESS button
Adjust the brightness of a projected image (pp.23, 28).
!9
i INPUT buttons
Select an input source (p.24
o LAMP CONTROL button
!8 Select a lamp mode (pp.23, 29).
!0 FREEZE button
!7 Freeze the projected image (p.23).
!6
!1 NO SHOW button
Temporarily turn off the projected image (p.23).
!5
!2 LOGO button
Display the captured logo (p.23).
!4
!3 COLOR TEMP . button
!3
Adjust the color temperature of a projected image (p.28).
!2
!4 SHARPNESS button
Adjust the sharpness of a projected image (pp.23, 29).
!1
!5 COLOR button
Adjust the color intensity of a projected image (pp.23, 28).
!0
!6 CONTRAST button
Adjust the contrast of a projected image (pp.23, 28).
!7 IMAGE ADj . button
Display the Image adj. Menu items one at a time and directly
adjust the selected items (pp.23, 28).
!8 IMAGE MODE buttons
Select an image mode (pp.23, 27).
!9 INFO . button
Display the input source information (p.43).
@0 OK button
Execute the selected item or access the sub-menu items (p.20).
@1 BACK button
Return to the previous menu.
✔
Note:
Part Names and Functions
ed7 8 buttons
).
).
To ensure safe operation, observe the following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene,
thinner, spray, or any other chemicals.
11